Why can’t the rotary drilling rig rope presser rotate?

Fault phenomenon:

The rotary drilling rig rope presser is stuck and cannot rotate, and the steel wire rope is severely worn.

Fault analysis:

The presser cannot rotate, the steel wire rope is severely worn. Generally, it is due to the lack of timely maintenance of the presser, the lack of lubricating oil inside the presser, which leads to the presser not rotating flexibly, deforming, and even damaging and jamming the internal bearings of the presser, causing wear on the steel wire rope.

Fault reasons:

1.Lack of lubricating grease inside the presser;

2.Deformation of the presser;

3.Damage to the internal bearings of the presser, causing jamming.

Troubleshooting methods:

1.On-site inspection of the presser, no deformation, severe wear on the surface of the presser;

2.Disassemble the presser and find that there is a lack of lubricating grease inside the presser;

3.Further disassemble the presser and find that the internal bearings of the presser are damaged, causing the presser to be unable to rotate;

Replace the internal bearings of the presser, reinstall the presser, add lubricating grease, and troubleshoot the fault.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *